Comments

Garmin BaseCamp™ Tutorials — 23 Comments

  1. You mention the difference between Waypoints and Shaping Points (being listed in the list area or not), but not how to create shaping points. I have used Basecamp for sometime now, and my previous Garmin units did not announce the “waypoints” that I had changed to shaping points, via the route detail waypoints list. But now my Garmin 660, announces everything, whether it is designated as “Alert on Arrival” or not. Is there a way to have the Garmin 660 not announce every waypoint/shaping point, based on the settings in Basecamp or the route?

    • Shaping points are created when you Alt-drag a route or use the Insert button to alter the route.
      Older models of the Zumo such as the 660/665 alert everything. There’s no way to change that. Thanks for watching my videos.

      • Thank you for the reply. You have a very good series of tutorial videos for Basecamp. I use Basecamp extensively for leading my rides. When I first purchased my Garmin 660, when I designated my waypoints as “not alert”, they where silent, but after a firmware update from Garmin, the 660 began announcing everything. I was told that one of your videos described a way to make the Garmin 660 “not announce shaping points” once again, which your video defined as those waypoints not listed in the library. I guess they were mistaken, when they viewed your videos. Take care and God bless you and yours.

        • Sorry, I didn’t do a video on that. I’m not aware of way to do that on my 665. Check out this thread. It says that shaping points created using the insert tool don’t alert on the 600. You might want to experiment with this.

  2. Hello EZ Moto Tim, I have a Gaia GPS track that is supposed to be an out and back. Gaia GPS quit at the end of the out. All I want to do is finish the back by telling it to track back to the starting Trail Head. Do you have a video for that?

    • I don’t know how the Gaia handles return trips. What I do is create two routes, one out and one in.

  3. Regarding Area Avoidances. I understand from your videos how this works in BaseCamp, but do these areas get transferred to the GPS so that in the event the route gets recalculated on device, the avoidance area is still recognized?

    • I’m not aware of a way to copy area avoidances to a GPS. I beleive you can enter them manually on the Zumo XT.

  4. Hi Tim,

    My wife and I live in Northern Wisconsin and are planning a trip around Lake Superior on our Spyders. Would I be better off creating two trips, one through Minnesotta to the furthest point above Lake Superior and then another coming back home through Sault Ste Marie?

    Thanks…love your video’s!!

    Jim

    • It’s always better to create out and back routes rather than a circular route. Sometimes the GPS will “short circuit” a circular route and bring you right back home.

  5. I was trying to fire up my years old trusty copy of Mapsource Trip and Waypoint Manager that was gathering dust for a few years, and it was being super cranky with Windows 10. Then I found BaseCamp which is apparently an update to the old Trip and Waypoint Manager. Great! Just watched a couple of your videos as a refresher.

    • Spend some time getting to know BaseCamp and you’ll enjoy it. Thanks for your comment and for watching my videos.

  6. Good morning EZ Moto Tim
    I went to Buy Me A Coffee.
    It appears that I have to join the site.
    I really don’t wat to set up a business.
    How do I buy you a coffee?
    Is there a page with a link to buy a coffee?

    Bill

  7. Firstly Tim, thank you so much for investing your time and effort in developing these excellent resource materials.

    I am a “lower tech user” who can learn. However, it just takes some time for me to “get it”. I bought a new ZUMO XT and really want to maximize my investment in it. I’ve watched every one of your videos, taken notes and now understand much of it. A few things I still don’t get but I’m sure those light bulba will go off eventually.

    One topic I don’t see is an overview. For instance, there are a number of different apps that are available, used for different purposes and work together in some capacity for route planning. I would appreciate a clear and simple explanation of these.

    For example, What is “Basecamp”, what does it do? and how does it interface with say Garmin Express? Same questions on Garmin Express. What is it? What does it do and how does it interface with say my ZUMO XT. Hopefully you get the picture.

    Sometimes when people are so expert in a subject, they tend to make assumptions about their audience or just leave out the fundamental basics that us neophytes need before we can put the pieces together and grow our knowledge and understanding.

    Keep up the great work and thanks again Tim. Ride safe … All-Ways. ~ Nela ~

    • You’re right, those of us who have been using tools to plan trips no longer have access to a “newbie’s” mindset. I’ll try to give you a quick overview that addresses your concerns.

      Garmin Express is an app that stands at the top of the pyramid. It has one basic function (and a couple collateral functions.) It’s primary purpose is to update the firmware on a GPS and update the “maps” on a GPS. The term, “maps” includes the maps you see on the screen and the database of points of interest (POI) that you can lookup on the GPS. (Restaurants, Gas Stations, Parks, etc.) One collateral function is to copy the maps and POIs to a computer for BaseCamp™ to use. Another collateral function is to backup your GPS data to a computer.

      BaseCamp™ is a program designed to make it easier for you to create a route for the GPS to follow. We motorcyclists often want to follow specific roads on a ride. If you just put your destination into the GPS and tell it to take you there, it will follow the most direct route. You may want to go on other, more picturesque roads. Creating that route using just the GPS is tedious. Instead, you create the route in BaseCamp™ and then transfer the route to the GPS. You then tell the GPs to use the route you created in BaseCamp™.

      That’s a nutshell overview. I hope you find it useful.

  8. First – GREAT Basecamp video collection. No one else has such extensive library and explains it as well.

    I prefer very curvey PAVED raods. How does Basecamp distinguish between paved and dirt. I see many roads go to a dashed line but I still think some of those are paved(?)

    • There is an option in each Activity Profile / Routing to avoid unpaved roads. I don’t know how it knows what is unpaved. That info would be embedded in the map. The best way to verify is to use Google Maps Street View.

  9. Hi Tim Thanks for taking the time to do the videos they are great, one thing I struggle with is when I share a route to friends the routes don’t always transfer the same data, so we end up with the scenario of mine says left mine says right at junctions, also mileage will be different as will times, i,m sure it’s an easy fix but can’t put my finger on why, please help and thanks again.

    Kind Regards

    Si

Leave a Reply

Your email address will not be published. Required fields are marked *

HTML tags allowed in your comment: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>